2014 – 2018 Chevy Silverado / Sierra Complete 3/4 DJM Kit with Cast Aluminum Spindles

2014-2016 4WD or 2016.5-18 2WD Chevy Silverado / Sierra Complete 3/4 DJM Kit with Cast Alumnum Spindles –

2WD only – not intended for 4WD platform

2014+ Silverado’s come from the factory 2 ways, either with cast iron steering knuckles or cast aluminum steering knuckles. It is important to know what you have, before you order your parts. So, how can I find out which spindle I have? Probably the easiest way is to turn your steering wheel all the way to the left (drivers side), should look like the image above,  find your spindle. If it is dark, a little rusty looking it is a cast iron spindle. If it is silvery or shiny it is a aluminum spindle. If you have any doubt get another opinion or ask you mechanic.   

Have cast aluminum spindles? You’re in the right place!

Have Cast Iron spindles?  DJM2507-2/3 for the correct kit!

You want the Deep Drop, like in the weeds kinda drop, right? You know of course there will be sacrifices made, right. The big sacrifice here? Your three inches closer to the ground, still sporting the factory coil springs and able to set your alignment to factory specs, not much of a sacrifice! Calmax Control Arms make this possible, you just can’t get that with spindles and springs. If you could we would build it. Upper and lower control arms are the key, this set of arms allowed us to build you a 3″ drop around the factory strut that retains full suspension travel and factory ball joint angles. Ball joints move freely without binding and your able to dial in the factory alignment specs! You’ll love they way you look!The rear kit consists of an axle flip kit featuring those DJM exclusive pinion adjustable axle brackets and new shackle hangers that invert the shackle mounting point allowing the longer shackles included to lift the rear end to the four-inch drop position.(A clever way to get around those welded hangers!)

CALMAX Control Arms often allow you to keep your factory shocks! Here you can keep and DON”T have to modify your factory strut!! Here you can choose the correct rear shock to work with these DJM parts,Part Number 2200.