2007 – 2016 Chevy Silverado / Sierra Complete 4/7 DJM Kit with Cast Iron Spindles
2WD only – not intended for 4WD platform
2014 and newer Silverado’s come from the factory 2 ways, either with cast iron steering knuckles or cast aluminum steering knuckles. It is important to know what you have, before you order your parts.
So, how can I find out which spindle I have? Probably the easiest way is to turn your steering wheel all the way to the left (drivers side), should look like the image above, find your spindle. If it is dark, a little rusty looking it is a cast iron spindle. If it is silvery or shiny it is a aluminum spindle. If you have any doubt get another opinion or ask you mechanic.
Have cast iron spindles? You’re in the right place!
Have Aluminum spindles? DJM2515-4/7 for the correct kit!
You want the Deep Drop, like in the weeds kinda drop, right? You know of course there will be sacrifices made, right. The big sacrifice here? Your four inches closer to the ground, still sporting the factory coil springs and able to set your alignment to factory specs, not much of a sacrifice! Calmax Control Arms make this possible, you just can’t get that with spindles and springs. If you could we would build it. Upper and lower control arms are the key, this set of arms allowed us to build you a 4″ drop around the factory strut that retains full suspension travel and factory ball joint angles. Ball joints move freely without binding and your able to dial in the factory alignment specs! You’ll love they way you look!This is the deepest flip you can get for your Silverado, a whopping 7″ wow! All you need is the famous DJM pinion adjustable axle brackets, U-bolts, and spring plates with all hardware needed included and you will enjoy a full 7″ lowering. A 4/7 kit will turn heads when you drive by!
CALMAX Control Arms often allow you to keep your factory shocks! Here you can keep and DON”T have to modify your factory strut!!Here you can choose the correct rear shock to work with these DJM parts,Part Number 1800.