2007 – 2016 Chevy Silverado / Sierra Complete 3/4 DJM Kit with Cast Iron Spindles
2WD only – not intended for 4WD platform
2014 and newer Silverado’s come from the factory 2 ways, either with cast iron steering knuckles or cast aluminum steering knuckles. It is important to know what you have, before you order your parts.
So, how can I find out which spindle I have? Probably the easiest way is to turn your steering wheel all the way to the left (drivers side), should look like the image above, find your spindle. If it is dark, a little rusty looking it is a cast iron spindle. If it is silvery or shiny it is a aluminum spindle. If you have any doubt get another opinion or ask you mechanic.
Have cast iron spindles? You’re in the right place!
Have Aluminum spindles? DJM2515-3/4 for the correct kit!
So what’s better than a 2″ Calmax Control Arm set for the front?How about a 3 inch Calmax Control Arm set. With this kit you can get a 3 inch front and 4″ rear drop that is completely aligned will and suffers no loss of travel in the front with no worries about will clearance issues.These Calmax arms will give you a 3 inch drop and retain factory travel and factory alignment specifications. They do it by replacing both upper and lower control arms! Simply remove factory arms and replace with your Calmax arms and you’re done!The rear kit consists of an axle flip kit featuring those DJM exclusive pinion adjustable axle brackets and new shackle hangers that inve
CALMAX Control Arms often allow you to keep your factory shocks! Here you can keep and DON”T have to modify your factory strut!!Here you can choose the correct rear shock to work with these DJM parts ,Part Number 2200.