2001 -2010 Chevy 1500 HD 3″ Front / 5″ Rear Complete DJM Lowering Kit

2001 -2010 Chevy 1500 HD 3″ Front / 5″ Rear Complete DJM Lowering Kit

Featuring Calmax Control Arms

If you don’t want your HD to set on the ground then this is the kit for you. The front is lowered 3″ by using Calmax Control Arms, just remove and replace the factory arms! Your sporting urethane bushings and brand new all steel ball joints with a 3″ drop where the factory spring rate in your torsion bars are retained and a factory ride is preserved. Ball joint angles and alignment are also set right!Setting the rear in proper alignment with the front a 5″ Hanger/Shackle kit is employed. The rear leaf spring is moved up on the frame using the brackets in the kit. To avoid an especially bad installation situation, take a peek at your factory leaf spring eye hangers and make sure they match the look of the picture below! All the 1500HD’s we’ve seen use this part but to make double dang sure you have the right parts, a quick inspection before you order can save you from finding out you don’t have the right parts when you need them most!

CALMAX SuperShocks are the best choice for your project. Here you can choose the correct front shock to work with these DJM parts. The 6 inch front drop means you need a shorter shock. Calmax Supershock part number 1415 is the perfect choice! In case your wondering why 2 different shock part numbers in the rear? Your factory shock mounts are staggered, one in front and one behind the rear axle, since your going to the trouble to lower why not have the optimum length shock for each side! Calmax Supershock number 2200 is for the drivers side. Calmax Supershock number 2400 is for the passenger side.