It fits stock 5″ drop kits WITH OE AIR RIDE
Apoc Chevrolet Tahoe’s suburban rear adjustable control arms are a significant upgrade from stock. Factory trailing arms work great with factory-sized tires and suspension, but you need more substantial and longer control arms to maintain the correct Pinion angle once you go lower, Apoc Chevrolet Tahoe, suburban rear trailing arms are built to support proper suspension and driveline geometry to keep your rig handling like stock but better. You change your driveline angles when adding any drop to your Tahoe or Suburban, creating vibration and premature U-joint failure. Big wheel and drops look great but don’t sacrifice reliability for looks; upgrade your control arms and drive easily. Adjustable Controls arms are fully adjustable from stock to 5″ of drop, so if you’re starting with a mild drop for now but upgrading later, these arms will suit your needs as you add more lift over time.
- 2 Upper Rear Control Arms
- 2 Lower Rear Control Arms
- Top Quality Polyurethane Bushings
- Heavy Wall Tubing
- Bushing Ends DOM Tubing
- Uses Factory Hardware
- Grease Fitting For Each Bushing For Long Life
- 3-4 Hours
- Basic hand tools
- Jack and Jack stand.
****NOTE FROM SPORTTRUCKPROS: Customers report interference with the caliper bolt on drops between 4″ to 6″. We recommend this kit for only mild drops.
Control Arm lengths
If upgrading from factory control arms, ensure you set the length to the correct lift size to keep your steering geometry accurate. The larger the lift, the longer the control arms. Don’t assume what your lift size is. Contact the lift kit manufacturer to verify your lift size if you are unsure. The Instructions will give you the measurements to set each control arm to match your lift, and an alignment is recommended after installation to ensure all alignment angles are proper.