1973 -1987 C10 Complete DJM 5/5 Kit
Note: Measure the width of your disc brake rotor
The good old drop spindle, as classic as the truck it’s self, sports a 3″ drop in the front. Whats important here is to be sure to measure the width of your brake rotor. You will have either a 1″ or 1.25″ rotor. If you have a 1″ rotor use (DJM2045L-5/5). Pair the spindles up with a set of 2″ engineered DJM drop springs, combined you end up with about 5″ of total drop in the front!The rear is a flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-section” required and there are new U-bolts and leaf spring plates included to replace the original parts if they need to be replaced.
CALMAX SuperShocks are the best choice for your project. Here you can choose the correct front shock to work with these DJM parts. The 4 inch front drop means you need a shorter shock. Calmax Supershock part number 1309 is the perfect choice! Here you can choose the correct rear shock to work with these DJM parts. The 5 inch rear drop means you need a shorter shock. Calmax SuperShock part number 2100 is the perfect choice!